perlfaq6 - Regexes ($Revision: 1.27 $, $Date: 1999/05/23 16:08:30 $)
This section is surprisingly small because the rest of the FAQ is littered with answers involving regular expressions. For example, decoding a URL and checking whether something is a number are handled with regular expressions, but those answers are found elsewhere in this document (in perlfaq9: ``How do I decode or create those %-encodings on the web'' and perfaq4: ``How do I determine whether a scalar is a number/whole/integer/float'', to be precise).
Three techniques can make regular expressions maintainable and understandable.
Describe what you're doing and how you're doing it, using normal Perl comments.
# turn the line into the first word, a colon, and the
# number of characters on the rest of the line
s/^(\w+)(.*)/ lc($1) . ":" . length($2) /meg;The /x modifier causes whitespace to be ignored in a regex pattern (except in a character class), and also allows you to use normal comments there, too. As you can imagine, whitespace and comments help a lot.
/x lets you turn this:
s{<(?:[^>'"]*|".*?"|'.*?')+>}{}gs;into this:
s{ < # opening angle bracket
(?: # Non-backreffing grouping paren
[^>'"] * # 0 or more things that are neither > nor ' nor "
| # or else
".*?" # a section between double quotes (stingy match)
| # or else
'.*?' # a section between single quotes (stingy match)
) + # all occurring one or more times
> # closing angle bracket
}{}gsx; # replace with nothing, i.e. deleteIt's still not quite so clear as prose, but it is very useful for describing the meaning of each part of the pattern.
While we normally think of patterns as being delimited with / characters, they can be delimited by almost any character. perlre describes this. For example, the s/// above uses braces as delimiters. Selecting another delimiter can avoid quoting the delimiter within the pattern:
s/\/usr\/local/\/usr\/share/g; # bad delimiter choice
s#/usr/local#/usr/share#g; # betterEither you don't have more than one line in the string you're looking at (probably), or else you aren't using the correct modifier(s) on your pattern (possibly).
There are many ways to get multiline data into a string. If you want it to happen automatically while reading input, you'll want to set $/ (probably to '' for paragraphs or undef for the whole file) to allow you to read more than one line at a time.
Read perlre to help you decide which of /s and /m (or both) you might want to use: /s allows dot to include newline, and /m allows caret and dollar to match next to a newline, not just at the end of the string. You do need to make sure that you've actually got a multiline string in there.
For example, this program detects duplicate words, even when they span line breaks (but not paragraph ones). For this example, we don't need /s because we aren't using dot in a regular expression that we want to cross line boundaries. Neither do we need /m because we aren't wanting caret or dollar to match at any point inside the record next to newlines. But it's imperative that $/ be set to something other than the default, or else we won't actually ever have a multiline record read in.
$/ = ''; # read in more whole paragraph, not just one line
while ( <> ) {
while ( /\b([\w'-]+)(\s+\1)+\b/gi ) { # word starts alpha
print "Duplicate $1 at paragraph $.\n";
}
}Here's code that finds sentences that begin with "From " (which would be mangled by many mailers):
$/ = ''; # read in more whole paragraph, not just one line
while ( <> ) {
while ( /^From /gm ) { # /m makes ^ match next to \n
print "leading from in paragraph $.\n";
}
}Here's code that finds everything between START and END in a paragraph:
undef $/; # read in whole file, not just one line or paragraph
while ( <> ) {
while ( /START(.*?)END/sm ) { # /s makes . cross line boundaries
print "$1\n";
}
}You can use Perl's somewhat exotic .. operator (documented in perlop):
perl -ne 'print if /START/ .. /END/' file1 file2 ...If you wanted text and not lines, you would use
perl -0777 -ne 'print "$1\n" while /START(.*?)END/gs' file1 file2 ...But if you want nested occurrences of START through END, you'll run up against the problem described in the question in this section on matching balanced text.
Here's another example of using ..:
while (<>) {
$in_header = 1 .. /^$/;
$in_body = /^$/ .. eof();
# now choose between them
} continue {
reset if eof(); # fix $.
} $/ must be a string, not a regular expression. Awk has to be better for something. :-)
Actually, you could do this if you don't mind reading the whole file into memory:
undef $/;
@records = split /your_pattern/, <FH>;The Net::Telnet module (available from CPAN) has the capability to wait for a pattern in the input stream, or timeout if it doesn't appear within a certain time.
## Create a file with three lines.
open FH, ">file";
print FH "The first line\nThe second line\nThe third line\n";
close FH;
## Get a read/write filehandle to it.
$fh = new FileHandle "+<file";
## Attach it to a "stream" object.
use Net::Telnet;
$file = new Net::Telnet (-fhopen => $fh);
## Search for the second line and print out the third.
$file->waitfor('/second line\n/');
print $file->getline;Here's a lovely Perlish solution by Larry Rosler. It exploits properties of bitwise xor on ASCII strings.
$_= "this is a TEsT case";
$old = 'test';
$new = 'success';
s{(\Q$old\E)}
{ uc $new | (uc $1 ^ $1) .
(uc(substr $1, -1) ^ substr $1, -1) x
(length($new) - length $1)
}egi;
print;And here it is as a subroutine, modelled after the above:
sub preserve_case($$) {
my ($old, $new) = @_;
my $mask = uc $old ^ $old;
uc $new | $mask .
substr($mask, -1) x (length($new) - length($old))
}
$a = "this is a TEsT case";
$a =~ s/(test)/preserve_case($1, "success")/egi;
print "$a\n";This prints:
this is a SUcCESS caseJust to show that C programmers can write C in any programming language, if you prefer a more C-like solution, the following script makes the substitution have the same case, letter by letter, as the original. (It also happens to run about 240% slower than the Perlish solution runs.) If the substitution has more characters than the string being substituted, the case of the last character is used for the rest of the substitution.
# Original by Nathan Torkington, massaged by Jeffrey Friedl
#
sub preserve_case($$)
{
my ($old, $new) = @_;
my ($state) = 0; # 0 = no change; 1 = lc; 2 = uc
my ($i, $oldlen, $newlen, $c) = (0, length($old), length($new));
my ($len) = $oldlen < $newlen ? $oldlen : $newlen;
for ($i = 0; $i < $len; $i++) {
if ($c = substr($old, $i, 1), $c =~ /[\W\d_]/) {
$state = 0;
} elsif (lc $c eq $c) {
substr($new, $i, 1) = lc(substr($new, $i, 1));
$state = 1;
} else {
substr($new, $i, 1) = uc(substr($new, $i, 1));
$state = 2;
}
}
# finish up with any remaining new (for when new is longer than old)
if ($newlen > $oldlen) {
if ($state == 1) {
substr($new, $oldlen) = lc(substr($new, $oldlen));
} elsif ($state == 2) {
substr($new, $oldlen) = uc(substr($new, $oldlen));
}
}
return $new;
}\w match national character sets?See perllocale.
/[a-zA-Z]/?One alphabetic character would be /[^\W\d_]/, no matter what locale you're in. Non-alphabetics would be /[\W\d_]/ (assuming you don't consider an underscore a letter).
The Perl parser will expand $variable and @variable references in regular expressions unless the delimiter is a single quote. Remember, too, that the right-hand side of a s/// substitution is considered a double-quoted string (see perlop for more details). Remember also that any regex special characters will be acted on unless you precede the substitution with \Q. Here's an example:
$string = "to die?";
$lhs = "die?";
$rhs = "sleep, no more";
$string =~ s/\Q$lhs/$rhs/;
# $string is now "to sleep no more"Without the \Q, the regex would also spuriously match "di".
/o really for?Using a variable in a regular expression match forces a re-evaluation (and perhaps recompilation) each time the regular expression is encountered. The /o modifier locks in the regex the first time it's used. This always happens in a constant regular expression, and in fact, the pattern was compiled into the internal format at the same time your entire program was.
Use of /o is irrelevant unless variable interpolation is used in the pattern, and if so, the regex engine will neither know nor care whether the variables change after the pattern is evaluated the very first time.
/o is often used to gain an extra measure of efficiency by not performing subsequent evaluations when you know it won't matter (because you know the variables won't change), or more rarely, when you don't want the regex to notice if they do.
For example, here's a "paragrep" program:
$/ = ''; # paragraph mode
$pat = shift;
while (<>) {
print if /$pat/o;
}While this actually can be done, it's much harder than you'd think. For example, this one-liner
perl -0777 -pe 's{/\*.*?\*/}{}gs' foo.cwill work in many but not all cases. You see, it's too simple-minded for certain kinds of C programs, in particular, those with what appear to be comments in quoted strings. For that, you'd need something like this, created by Jeffrey Friedl and later modified by Fred Curtis.
$/ = undef;
$_ = <>;
s#/\*[^*]*\*+([^/*][^*]*\*+)*/|("(\\.|[^"\\])*"|'(\\.|[^'\\])*'|.[^/"'\\]*)#$2#gs
print;This could, of course, be more legibly written with the /x modifier, adding whitespace and comments. Here it is expanded, courtesy of Fred Curtis.
s{
/\* ## Start of /* ... */ comment
[^*]*\*+ ## Non-* followed by 1-or-more *'s
(
[^/*][^*]*\*+
)* ## 0-or-more things which don't start with /
## but do end with '*'
/ ## End of /* ... */ comment
| ## OR various things which aren't comments:
(
" ## Start of " ... " string
(
\\. ## Escaped char
| ## OR
[^"\\] ## Non "\
)*
" ## End of " ... " string
| ## OR
' ## Start of ' ... ' string
(
\\. ## Escaped char
| ## OR
[^'\\] ## Non '\
)*
' ## End of ' ... ' string
| ## OR
. ## Anything other char
[^/"'\\]* ## Chars which doesn't start a comment, string or escape
)
}{$2}gxs;A slight modification also removes C++ comments:
s#/\*[^*]*\*+([^/*][^*]*\*+)*/|//[^\n]*|("(\\.|[^"\\])*"|'(\\.|[^'\\])*'|.[^/"'\\]*)#$2#gs;Although Perl regular expressions are more powerful than "mathematical" regular expressions because they feature conveniences like backreferences (\1 and its ilk), they still aren't powerful enough--with the possible exception of bizarre and experimental features in the development-track releases of Perl. You still need to use non-regex techniques to parse balanced text, such as the text enclosed between matching parentheses or braces, for example.
An elaborate subroutine (for 7-bit ASCII only) to pull out balanced and possibly nested single chars, like ` and ', { and }, or ( and ) can be found in http://www.perl.com/CPAN/authors/id/TOMC/scripts/pull_quotes.gz .
The C::Scan module from CPAN contains such subs for internal use, but they are undocumented.
Most people mean that greedy regexes match as much as they can. Technically speaking, it's actually the quantifiers (?, *, +, {}) that are greedy rather than the whole pattern; Perl prefers local greed and immediate gratification to overall greed. To get non-greedy versions of the same quantifiers, use (??, *?, +?, {}?).
An example:
$s1 = $s2 = "I am very very cold";
$s1 =~ s/ve.*y //; # I am cold
$s2 =~ s/ve.*?y //; # I am very coldNotice how the second substitution stopped matching as soon as it encountered "y ". The *? quantifier effectively tells the regular expression engine to find a match as quickly as possible and pass control on to whatever is next in line, like you would if you were playing hot potato.
Use the split function:
while (<>) {
foreach $word ( split ) {
# do something with $word here
}
}Note that this isn't really a word in the English sense; it's just chunks of consecutive non-whitespace characters.
To work with only alphanumeric sequences (including underscores), you might consider
while (<>) {
foreach $word (m/(\w+)/g) {
# do something with $word here
}
}To do this, you have to parse out each word in the input stream. We'll pretend that by word you mean chunk of alphabetics, hyphens, or apostrophes, rather than the non-whitespace chunk idea of a word given in the previous question:
while (<>) {
while ( /(\b[^\W_\d][\w'-]+\b)/g ) { # misses "`sheep'"
$seen{$1}++;
}
}
while ( ($word, $count) = each %seen ) {
print "$count $word\n";
}If you wanted to do the same thing for lines, you wouldn't need a regular expression:
while (<>) {
$seen{$_}++;
}
while ( ($line, $count) = each %seen ) {
print "$count $line";
}If you want these output in a sorted order, see perlfaq4: ``How do I sort a hash (optionally by value instead of key)?''.
See the module String::Approx available from CPAN.
The following is extremely inefficient:
# slow but obvious way
@popstates = qw(CO ON MI WI MN);
while (defined($line = <>)) {
for $state (@popstates) {
if ($line =~ /\b$state\b/i) {
print $line;
last;
}
}
} That's because Perl has to recompile all those patterns for each of the lines of the file. As of the 5.005 release, there's a much better approach, one which makes use of the new qr// operator:
# use spiffy new qr// operator, with /i flag even
use 5.005;
@popstates = qw(CO ON MI WI MN);
@poppats = map { qr/\b$_\b/i } @popstates;
while (defined($line = <>)) {
for $patobj (@poppats) {
print $line if $line =~ /$patobj/;
}
}\b work for me?Two common misconceptions are that \b is a synonym for \s+ and that it's the edge between whitespace characters and non-whitespace characters. Neither is correct. \b is the place between a \w character and a \W character (that is, \b is the edge of a "word"). It's a zero-width assertion, just like ^, $, and all the other anchors, so it doesn't consume any characters. perlre describes the behavior of all the regex metacharacters.
Here are examples of the incorrect application of \b, with fixes:
"two words" =~ /(\w+)\b(\w+)/; # WRONG
"two words" =~ /(\w+)\s+(\w+)/; # right
" =matchless= text" =~ /\b=(\w+)=\b/; # WRONG
" =matchless= text" =~ /=(\w+)=/; # rightAlthough they may not do what you thought they did, \b and \B can still be quite useful. For an example of the correct use of \b, see the example of matching duplicate words over multiple lines.
An example of using \B is the pattern \Bis\B. This will find occurrences of "is" on the insides of words only, as in "thistle", but not "this" or "island".
Once Perl sees that you need one of these variables anywhere in the program, it provides them on each and every pattern match. The same mechanism that handles these provides for the use of $1, $2, etc., so you pay the same price for each regex that contains capturing parentheses. If you never use $&, etc., in your script, then regexes without capturing parentheses won't be penalized. So avoid $&, $', and $` if you can, but if you can't, once you've used them at all, use them at will because you've already paid the price. Remember that some algorithms really appreciate them. As of the 5.005 release. the $& variable is no longer "expensive" the way the other two are.
\G in a regular expression?The notation \G is used in a match or substitution in conjunction with the /g modifier to anchor the regular expression to the point just past where the last match occurred, i.e. the pos() point. A failed match resets the position of \G unless the /c modifier is in effect. \G can be used in a match without the /g modifier; it acts the same (i.e. still anchors at the pos() point) but of course only matches once and does not update pos(), as non-/g expressions never do. \G in an expression applied to a target string that has never been matched against a /g expression before or has had its pos() reset is functionally equivalent to \A, which matches at the beginning of the string.
For example, suppose you had a line of text quoted in standard mail and Usenet notation, (that is, with leading > characters), and you want change each leading > into a corresponding :. You could do so in this way:
s/^(>+)/':' x length($1)/gem;Or, using \G, the much simpler (and faster):
s/\G>/:/g;A more sophisticated use might involve a tokenizer. The following lex-like example is courtesy of Jeffrey Friedl. It did not work in 5.003 due to bugs in that release, but does work in 5.004 or better. (Note the use of /c, which prevents a failed match with /g from resetting the search position back to the beginning of the string.)
while (<>) {
chomp;
PARSER: {
m/ \G( \d+\b )/gcx && do { print "number: $1\n"; redo; };
m/ \G( \w+ )/gcx && do { print "word: $1\n"; redo; };
m/ \G( \s+ )/gcx && do { print "space: $1\n"; redo; };
m/ \G( [^\w\d]+ )/gcx && do { print "other: $1\n"; redo; };
}
}Of course, that could have been written as
while (<>) {
chomp;
PARSER: {
if ( /\G( \d+\b )/gcx {
print "number: $1\n";
redo PARSER;
}
if ( /\G( \w+ )/gcx {
print "word: $1\n";
redo PARSER;
}
if ( /\G( \s+ )/gcx {
print "space: $1\n";
redo PARSER;
}
if ( /\G( [^\w\d]+ )/gcx {
print "other: $1\n";
redo PARSER;
}
}
}but then you lose the vertical alignment of the regular expressions.
While it's true that Perl's regular expressions resemble the DFAs (deterministic finite automata) of the egrep(1) program, they are in fact implemented as NFAs (non-deterministic finite automata) to allow backtracking and backreferencing. And they aren't POSIX-style either, because those guarantee worst-case behavior for all cases. (It seems that some people prefer guarantees of consistency, even when what's guaranteed is slowness.) See the book "Mastering Regular Expressions" (from O'Reilly) by Jeffrey Friedl for all the details you could ever hope to know on these matters (a full citation appears in perlfaq2).
Both grep and map build a return list, regardless of their context. This means you're making Perl go to the trouble of building up a return list that you then just ignore. That's no way to treat a programming language, you insensitive scoundrel!
This is hard, and there's no good way. Perl does not directly support wide characters. It pretends that a byte and a character are synonymous. The following set of approaches was offered by Jeffrey Friedl, whose article in issue #5 of The Perl Journal talks about this very matter.
Let's suppose you have some weird Martian encoding where pairs of ASCII uppercase letters encode single Martian letters (i.e. the two bytes "CV" make a single Martian letter, as do the two bytes "SG", "VS", "XX", etc.). Other bytes represent single characters, just like ASCII.
So, the string of Martian "I am CVSGXX!" uses 12 bytes to encode the nine characters 'I', ' ', 'a', 'm', ' ', 'CV', 'SG', 'XX', '!'.
Now, say you want to search for the single character /GX/. Perl doesn't know about Martian, so it'll find the two bytes "GX" in the "I am CVSGXX!" string, even though that character isn't there: it just looks like it is because "SG" is next to "XX", but there's no real "GX". This is a big problem.
Here are a few ways, all painful, to deal with it:
$martian =~ s/([A-Z][A-Z])/ $1 /g; # Make sure adjacent ``martian'' bytes
# are no longer adjacent.
print "found GX!\n" if $martian =~ /GX/;Or like this:
@chars = $martian =~ m/([A-Z][A-Z]|[^A-Z])/g;
# above is conceptually similar to: @chars = $text =~ m/(.)/g;
#
foreach $char (@chars) {
print "found GX!\n", last if $char eq 'GX';
}Or like this:
while ($martian =~ m/\G([A-Z][A-Z]|.)/gs) { # \G probably unneeded
print "found GX!\n", last if $1 eq 'GX';
}Or like this:
die "sorry, Perl doesn't (yet) have Martian support )-:\n";There are many double- (and multi-) byte encodings commonly used these days. Some versions of these have 1-, 2-, 3-, and 4-byte characters, all mixed.
Well, if it's really a pattern, then just use
chomp($pattern = <STDIN>);
if ($line =~ /$pattern/) { }Alternatively, since you have no guarantee that your user entered a valid regular expression, trap the exception this way:
if (eval { $line =~ /$pattern/ }) { }If all you really want to search for a string, not a pattern, then you should either use the index() function, which is made for string searching, or if you can't be disabused of using a pattern match on a non-pattern, then be sure to use \Q...\E, documented in perlre.
$pattern = <STDIN>;
open (FILE, $input) or die "Couldn't open input $input: $!; aborting";
while (<FILE>) {
print if /\Q$pattern\E/;
}
close FILE;Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington. All rights reserved.
When included as part of the Standard Version of Perl, or as part of its complete documentation whether printed or otherwise, this work may be distributed only under the terms of Perl's Artistic License. Any distribution of this file or derivatives thereof outside of that package require that special arrangements be made with copyright holder.
Irrespective of its distribution, all code examples in this file are hereby placed into the public domain. You are permitted and encouraged to use this code in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit would be courteous but is not required.