perlapi - autogenerated documentation for the perl public API
This file contains the documentation of the perl public API generated by embed.pl, specifically a listing of functions, macros, flags, and variables that may be used by extension writers. The interfaces of any functions that are not listed here are subject to change without notice. For this reason, blindly using functions listed in proto.h is to be avoided when writing extensions.
Note that all Perl API global variables must be referenced with the PL_ prefix. Some macros are provided for compatibility with the older, unadorned names, but this support may be disabled in a future release.
The listing is alphabetical, case insensitive.
Same as av_len(). Deprecated, use av_len() instead.
int AvFILL(AV* av)Clears an array, making it empty. Does not free the memory used by the array itself.
void av_clear(AV* ar)Deletes the element indexed by key from the array. Returns the deleted element. flags is currently ignored.
SV* av_delete(AV* ar, I32 key, I32 flags)Returns true if the element indexed by key has been initialized.
This relies on the fact that uninitialized array elements are set to &PL_sv_undef.
bool av_exists(AV* ar, I32 key)Pre-extend an array. The key is the index to which the array should be extended.
void av_extend(AV* ar, I32 key)Returns the SV at the specified index in the array. The key is the index. If lval is set then the fetch will be part of a store. Check that the return value is non-null before dereferencing it to a SV*.
See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied arrays.
SV** av_fetch(AV* ar, I32 key, I32 lval)Ensure than an array has a given number of elements, equivalent to Perl's $#array = $fill;.
void av_fill(AV* ar, I32 fill)Returns the highest index in the array. Returns -1 if the array is empty.
I32 av_len(AV* ar)Creates a new AV and populates it with a list of SVs. The SVs are copied into the array, so they may be freed after the call to av_make. The new AV will have a reference count of 1.
AV* av_make(I32 size, SV** svp)Pops an SV off the end of the array. Returns &PL_sv_undef if the array is empty.
SV* av_pop(AV* ar)Pushes an SV onto the end of the array. The array will grow automatically to accommodate the addition.
void av_push(AV* ar, SV* val)Shifts an SV off the beginning of the array.
SV* av_shift(AV* ar)Stores an SV in an array. The array index is specified as key. The return value will be NULL if the operation failed or if the value did not need to be actually stored within the array (as in the case of tied arrays). Otherwise it can be dereferenced to get the original SV*. Note that the caller is responsible for suitably incrementing the reference count of val before the call, and decrementing it if the function returned NULL.
See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied arrays.
SV** av_store(AV* ar, I32 key, SV* val)Undefines the array. Frees the memory used by the array itself.
void av_undef(AV* ar)Unshift the given number of undef values onto the beginning of the array. The array will grow automatically to accommodate the addition. You must then use av_store to assign values to these new elements.
void av_unshift(AV* ar, I32 num)Converts a string s of length len from UTF8 into byte encoding. Unlike <utf8_to_bytes> but like bytes_to_utf8, returns a pointer to the newly-created string, and updates len to contain the new length. Returns the original string if no conversion occurs, len is unchanged. Do nothing if is_utf8 points to 0. Sets is_utf8 to 0 if s is converted or contains all 7bit characters.
NOTE: this function is experimental and may change or be removed without notice.
U8* bytes_from_utf8(U8 *s, STRLEN *len, bool *is_utf8)Converts a string s of length len from ASCII into UTF8 encoding. Returns a pointer to the newly-created string, and sets len to reflect the new length.
NOTE: this function is experimental and may change or be removed without notice.
U8* bytes_to_utf8(U8 *s, STRLEN *len)Performs a callback to the specified Perl sub. See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_argv(const char* sub_name, I32 flags, char** argv)Performs a callback to the specified Perl method. The blessed object must be on the stack. See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_method(const char* methname, I32 flags)Performs a callback to the specified Perl sub. See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_pv(const char* sub_name, I32 flags)Performs a callback to the Perl sub whose name is in the SV. See perlcall.
NOTE: the perl_ form of this function is deprecated.
I32 call_sv(SV* sv, I32 flags)Variable which is setup by xsubpp to indicate the class name for a C++ XS constructor. This is always a char*. See THIS.
char* CLASSThe XSUB-writer's interface to the C memcpy function. The src is the source, dest is the destination, nitems is the number of items, and type is the type. May fail on overlapping copies. See also Move.
void Copy(void* src, void* dest, int nitems, type)This is the XSUB-writer's interface to Perl's die function. Normally use this function the same way you use the C printf function. See warn.
If you want to throw an exception object, assign the object to $@ and then pass Nullch to croak():
errsv = get_sv("@", TRUE);
sv_setsv(errsv, exception_object);
croak(Nullch);
void croak(const char* pat, ...)Returns the stash of the CV.
HV* CvSTASH(CV* cv)If cv is a constant sub eligible for inlining. returns the constant value returned by the sub. Otherwise, returns NULL.
Constant subs can be created with newCONSTSUB or as described in "Constant Functions" in perlsub.
SV* cv_const_sv(CV* cv)Declare a stack marker variable, mark, for the XSUB. See MARK and dORIGMARK.
dMARK;Saves the original stack mark for the XSUB. See ORIGMARK.
dORIGMARK;Declares a local copy of perl's stack pointer for the XSUB, available via the SP macro. See SP.
dSP;Sets up stack and mark pointers for an XSUB, calling dSP and dMARK. This is usually handled automatically by xsubpp. Declares the items variable to indicate the number of items on the stack.
dXSARGS;Sets up the ix variable for an XSUB which has aliases. This is usually handled automatically by xsubpp.
dXSI32;Opening bracket on a callback. See LEAVE and perlcall.
ENTER;Tells Perl to eval the given string and return an SV* result.
NOTE: the perl_ form of this function is deprecated.
SV* eval_pv(const char* p, I32 croak_on_error)Tells Perl to eval the string in the SV.
NOTE: the perl_ form of this function is deprecated.
I32 eval_sv(SV* sv, I32 flags)Used to extend the argument stack for an XSUB's return values. Once used, guarantees that there is room for at least nitems to be pushed onto the stack.
void EXTEND(SP, int nitems)Analyses the string in order to make fast searches on it using fbm_instr() -- the Boyer-Moore algorithm.
void fbm_compile(SV* sv, U32 flags)Returns the location of the SV in the string delimited by str and strend. It returns Nullch if the string can't be found. The sv does not have to be fbm_compiled, but the search will not be as fast then.
char* fbm_instr(unsigned char* big, unsigned char* bigend, SV* littlesv, U32 flags)Closing bracket for temporaries on a callback. See SAVETMPS and perlcall.
FREETMPS;Returns the AV of the specified Perl array. If create is set and the Perl variable does not exist then it will be created. If create is not set and the variable does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
AV* get_av(const char* name, I32 create)Returns the CV of the specified Perl subroutine. If create is set and the Perl subroutine does not exist then it will be declared (which has the same effect as saying sub name;). If create is not set and the subroutine does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
CV* get_cv(const char* name, I32 create)Returns the HV of the specified Perl hash. If create is set and the Perl variable does not exist then it will be created. If create is not set and the variable does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
HV* get_hv(const char* name, I32 create)Returns the SV of the specified Perl scalar. If create is set and the Perl variable does not exist then it will be created. If create is not set and the variable does not exist then NULL is returned.
NOTE: the perl_ form of this function is deprecated.
SV* get_sv(const char* name, I32 create)A backward-compatible version of GIMME_V which can only return G_SCALAR or G_ARRAY; in a void context, it returns G_SCALAR. Deprecated. Use GIMME_V instead.
U32 GIMMEThe XSUB-writer's equivalent to Perl's wantarray. Returns G_VOID, G_SCALAR or G_ARRAY for void, scalar or list context, respectively.
U32 GIMME_VReturn the SV from the GV.
SV* GvSV(GV* gv)Returns the glob with the given name and a defined subroutine or NULL. The glob lives in the given stash, or in the stashes accessible via @ISA and @UNIVERSAL.
The argument level should be either 0 or -1. If level==0, as a side-effect creates a glob with the given name in the given stash which in the case of success contains an alias for the subroutine, and sets up caching info for this glob. Similarly for all the searched stashes.
This function grants "SUPER" token as a postfix of the stash name. The GV returned from gv_fetchmeth may be a method cache entry, which is not visible to Perl code. So when calling call_sv, you should not use the GV directly; instead, you should use the method's CV, which can be obtained from the GV with the GvCV macro.
GV* gv_fetchmeth(HV* stash, const char* name, STRLEN len, I32 level)GV* gv_fetchmethod(HV* stash, const char* name)Returns the glob which contains the subroutine to call to invoke the method on the stash. In fact in the presence of autoloading this may be the glob for "AUTOLOAD". In this case the corresponding variable $AUTOLOAD is already setup.
The third parameter of gv_fetchmethod_autoload determines whether AUTOLOAD lookup is performed if the given method is not present: non-zero means yes, look for AUTOLOAD; zero means no, don't look for AUTOLOAD. Calling gv_fetchmethod is equivalent to calling gv_fetchmethod_autoload with a non-zero autoload parameter.
These functions grant "SUPER" token as a prefix of the method name. Note that if you want to keep the returned glob for a long time, you need to check for it being "AUTOLOAD", since at the later time the call may load a different subroutine due to $AUTOLOAD changing its value. Use the glob created via a side effect to do this.
These functions have the same side-effects and as gv_fetchmeth with level==0. name should be writable if contains ':' or ' ''. The warning against passing the GV returned by gv_fetchmeth to call_sv apply equally to these functions.
GV* gv_fetchmethod_autoload(HV* stash, const char* name, I32 autoload)Returns a pointer to the stash for a specified package. name should be a valid UTF-8 string. If create is set then the package will be created if it does not already exist. If create is not set and the package does not exist then NULL is returned.
HV* gv_stashpv(const char* name, I32 create)Returns a pointer to the stash for a specified package, which must be a valid UTF-8 string. See gv_stashpv.
HV* gv_stashsv(SV* sv, I32 create)Used to indicate list context. See GIMME_V, GIMME and perlcall.
Indicates that arguments returned from a callback should be discarded. See perlcall.
Used to force a Perl eval wrapper around a callback. See perlcall.
Indicates that no arguments are being sent to a callback. See perlcall.
Used to indicate scalar context. See GIMME_V, GIMME, and perlcall.
Used to indicate void context. See GIMME_V and perlcall.
This flag, used in the length slot of hash entries and magic structures, specifies the structure contains a SV* pointer where a char* pointer is to be expected. (For information only--not to be used).
Returns the computed hash stored in the hash entry.
U32 HeHASH(HE* he)Returns the actual pointer stored in the key slot of the hash entry. The pointer may be either char* or SV*, depending on the value of HeKLEN(). Can be assigned to. The HePV() or HeSVKEY() macros are usually preferable for finding the value of a key.
void* HeKEY(HE* he)If this is negative, and amounts to HEf_SVKEY, it indicates the entry holds an SV* key. Otherwise, holds the actual length of the key. Can be assigned to. The HePV() macro is usually preferable for finding key lengths.
STRLEN HeKLEN(HE* he)Returns the key slot of the hash entry as a char* value, doing any necessary dereferencing of possibly SV* keys. The length of the string is placed in len (this is a macro, so do not use &len). If you do not care about what the length of the key is, you may use the global variable PL_na, though this is rather less efficient than using a local variable. Remember though, that hash keys in perl are free to contain embedded nulls, so using strlen() or similar is not a good way to find the length of hash keys. This is very similar to the SvPV() macro described elsewhere in this document.
char* HePV(HE* he, STRLEN len)Returns the key as an SV*, or Nullsv if the hash entry does not contain an SV* key.
SV* HeSVKEY(HE* he)Returns the key as an SV*. Will create and return a temporary mortal SV* if the hash entry contains only a char* key.
SV* HeSVKEY_force(HE* he)Sets the key to a given SV*, taking care to set the appropriate flags to indicate the presence of an SV* key, and returns the same SV*.
SV* HeSVKEY_set(HE* he, SV* sv)Returns the value slot (type SV*) stored in the hash entry.
SV* HeVAL(HE* he)Returns the package name of a stash. See SvSTASH, CvSTASH.
char* HvNAME(HV* stash)Clears a hash, making it empty.
void hv_clear(HV* tb)Deletes a key/value pair in the hash. The value SV is removed from the hash and returned to the caller. The klen is the length of the key. The flags value will normally be zero; if set to G_DISCARD then NULL will be returned.
SV* hv_delete(HV* tb, const char* key, I32 klen, I32 flags)Deletes a key/value pair in the hash. The value SV is removed from the hash and returned to the caller. The flags value will normally be zero; if set to G_DISCARD then NULL will be returned. hash can be a valid precomputed hash value, or 0 to ask for it to be computed.
SV* hv_delete_ent(HV* tb, SV* key, I32 flags, U32 hash)Returns a boolean indicating whether the specified hash key exists. The klen is the length of the key.
bool hv_exists(HV* tb, const char* key, I32 klen)Returns a boolean indicating whether the specified hash key exists. hash can be a valid precomputed hash value, or 0 to ask for it to be computed.
bool hv_exists_ent(HV* tb, SV* key, U32 hash)Returns the SV which corresponds to the specified key in the hash. The klen is the length of the key. If lval is set then the fetch will be part of a store. Check that the return value is non-null before dereferencing it to a SV*.
See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.
SV** hv_fetch(HV* tb, const char* key, I32 klen, I32 lval)Returns the hash entry which corresponds to the specified key in the hash. hash must be a valid precomputed hash number for the given key, or 0 if you want the function to compute it. IF lval is set then the fetch will be part of a store. Make sure the return value is non-null before accessing it. The return value when tb is a tied hash is a pointer to a static location, so be sure to make a copy of the structure if you need to store it somewhere.
See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.
HE* hv_fetch_ent(HV* tb, SV* key, I32 lval, U32 hash)Prepares a starting point to traverse a hash table. Returns the number of keys in the hash (i.e. the same as HvKEYS(tb)). The return value is currently only meaningful for hashes without tie magic.
NOTE: Before version 5.004_65, hv_iterinit used to return the number of hash buckets that happen to be in use. If you still need that esoteric value, you can get it through the macro HvFILL(tb).
I32 hv_iterinit(HV* tb)Returns the key from the current position of the hash iterator. See hv_iterinit.
char* hv_iterkey(HE* entry, I32* retlen)Returns the key as an SV* from the current position of the hash iterator. The return value will always be a mortal copy of the key. Also see hv_iterinit.
SV* hv_iterkeysv(HE* entry)Returns entries from a hash iterator. See hv_iterinit.
HE* hv_iternext(HV* tb)Performs an hv_iternext, hv_iterkey, and hv_iterval in one operation.
SV* hv_iternextsv(HV* hv, char** key, I32* retlen)Returns the value from the current position of the hash iterator. See hv_iterkey.
SV* hv_iterval(HV* tb, HE* entry)Adds magic to a hash. See sv_magic.
void hv_magic(HV* hv, GV* gv, int how)Stores an SV in a hash. The hash key is specified as key and klen is the length of the key. The hash parameter is the precomputed hash value; if it is zero then Perl will compute it. The return value will be NULL if the operation failed or if the value did not need to be actually stored within the hash (as in the case of tied hashes). Otherwise it can be dereferenced to get the original SV*. Note that the caller is responsible for suitably incrementing the reference count of val before the call, and decrementing it if the function returned NULL.
See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.
SV** hv_store(HV* tb, const char* key, I32 klen, SV* val, U32 hash)Stores val in a hash. The hash key is specified as key. The hash parameter is the precomputed hash value; if it is zero then Perl will compute it. The return value is the new hash entry so created. It will be NULL if the operation failed or if the value did not need to be actually stored within the hash (as in the case of tied hashes). Otherwise the contents of the return value can be accessed using the He??? macros described here. Note that the caller is responsible for suitably incrementing the reference count of val before the call, and decrementing it if the function returned NULL.
See "Understanding the Magic of Tied Hashes and Arrays" in perlguts for more information on how to use this function on tied hashes.
HE* hv_store_ent(HV* tb, SV* key, SV* val, U32 hash)Undefines the hash.
void hv_undef(HV* tb)Returns a boolean indicating whether the C char is an ASCII alphanumeric character (including underscore) or digit.
bool isALNUM(char ch)Returns a boolean indicating whether the C char is an ASCII alphabetic character.
bool isALPHA(char ch)Returns a boolean indicating whether the C char is an ASCII digit.
bool isDIGIT(char ch)Returns a boolean indicating whether the C char is a lowercase character.
bool isLOWER(char ch)Returns a boolean indicating whether the C char is whitespace.
bool isSPACE(char ch)Returns a boolean indicating whether the C char is an uppercase character.
bool isUPPER(char ch)Tests if some arbitrary number of bytes begins in a valid UTF-8 character. Note that an INVARIANT (i.e. ASCII) character is a valid UTF-8 character. The actual number of bytes in the UTF-8 character will be returned if it is valid, otherwise 0.
STRLEN is_utf8_char(U8 *p)Returns true if first len bytes of the given string form a valid UTF8 string, false otherwise. Note that 'a valid UTF8 string' does not mean 'a string that contains UTF8' because a valid ASCII string is a valid UTF8 string.
bool is_utf8_string(U8 *s, STRLEN len)Variable which is setup by xsubpp to indicate the number of items on the stack. See "Variable-length Parameter Lists" in perlxs.
I32 itemsVariable which is setup by xsubpp to indicate which of an XSUB's aliases was used to invoke it. See "The ALIAS: Keyword" in perlxs.
I32 ixClosing bracket on a callback. See ENTER and perlcall.
LEAVE;Loads the module whose name is pointed to by the string part of name. Note that the actual module name, not its filename, should be given. Eg, "Foo::Bar" instead of "Foo/Bar.pm". flags can be any of PERL_LOADMOD_DENY, PERL_LOADMOD_NOIMPORT, or PERL_LOADMOD_IMPORT_OPS (or 0 for no flags). ver, if specified, provides version semantics similar to use Foo::Bar VERSION. The optional trailing SV* arguments can be used to specify arguments to the module's import() method, similar to use Foo::Bar VERSION LIST.
void load_module(U32 flags, SV* name, SV* ver, ...)Test if an the content of an SV looks like a number (or is a number). Inf and Infinity are treated as numbers (so will not issue a non-numeric warning), even if your atof() doesn't grok them.
I32 looks_like_number(SV* sv)Stack marker variable for the XSUB. See dMARK.
Clear something magical that the SV represents. See sv_magic.
int mg_clear(SV* sv)Copies the magic from one SV to another. See sv_magic.
int mg_copy(SV* sv, SV* nsv, const char* key, I32 klen)Finds the magic pointer for type matching the SV. See sv_magic.
MAGIC* mg_find(SV* sv, int type)Free any magic storage used by the SV. See sv_magic.
int mg_free(SV* sv)Do magic after a value is retrieved from the SV. See sv_magic.
int mg_get(SV* sv)Report on the SV's length. See sv_magic.
U32 mg_length(SV* sv)Turns on the magical status of an SV. See sv_magic.
void mg_magical(SV* sv)Do magic after a value is assigned to the SV. See sv_magic.
int mg_set(SV* sv)The XSUB-writer's interface to the C memmove function. The src is the source, dest is the destination, nitems is the number of items, and type is the type. Can do overlapping moves. See also Copy.
void Move(void* src, void* dest, int nitems, type)The XSUB-writer's interface to the C malloc function.
void New(int id, void* ptr, int nitems, type)Creates a new AV. The reference count is set to 1.
AV* newAV()The XSUB-writer's interface to the C malloc function, with cast.
void Newc(int id, void* ptr, int nitems, type, cast)Creates a constant sub equivalent to Perl sub FOO () { 123 } which is eligible for inlining at compile-time.
CV* newCONSTSUB(HV* stash, char* name, SV* sv)Creates a new HV. The reference count is set to 1.
HV* newHV()Creates an RV wrapper for an SV. The reference count for the original SV is incremented.
SV* newRV_inc(SV* sv)Creates an RV wrapper for an SV. The reference count for the original SV is not incremented.
SV* newRV_noinc(SV *sv)Creates a new SV. A non-zero len parameter indicates the number of bytes of preallocated string space the SV should have. An extra byte for a tailing NUL is also reserved. (SvPOK is not set for the SV even if string space is allocated.) The reference count for the new SV is set to 1. id is an integer id between 0 and 1299 (used to identify leaks).
SV* NEWSV(int id, STRLEN len)Creates a new SV and copies an integer into it. The reference count for the SV is set to 1.
SV* newSViv(IV i)Creates a new SV and copies a floating point value into it. The reference count for the SV is set to 1.
SV* newSVnv(NV n)Creates a new SV and copies a string into it. The reference count for the SV is set to 1. If len is zero, Perl will compute the length using strlen(). For efficiency, consider using newSVpvn instead.
SV* newSVpv(const char* s, STRLEN len)Creates a new SV an initialize it with the string formatted like sprintf.
SV* newSVpvf(const char* pat, ...)Creates a new SV and copies a string into it. The reference count for the SV is set to 1. Note that if len is zero, Perl will create a zero length string. You are responsible for ensuring that the source string is at least len bytes long.
SV* newSVpvn(const char* s, STRLEN len)Creates a new SV and populates it with a string from the string table. Turns on READONLY and FAKE. The idea here is that as string table is used for shared hash keys these strings will have SvPVX == HeKEY and hash lookup will avoid string compare.
SV* newSVpvn_share(const char* s, I32 len, U32 hash)Creates a new SV for the RV, rv, to point to. If rv is not an RV then it will be upgraded to one. If classname is non-null then the new SV will be blessed in the specified package. The new SV is returned and its reference count is 1.
SV* newSVrv(SV* rv, const char* classname)Creates a new SV which is an exact duplicate of the original SV.
SV* newSVsv(SV* old)Creates a new SV and copies an unsigned integer into it. The reference count for the SV is set to 1.
SV* newSVuv(UV u)Used by xsubpp to hook up XSUBs as Perl subs.
Used by xsubpp to hook up XSUBs as Perl subs. Adds Perl prototypes to the subs.
The XSUB-writer's interface to the C malloc function. The allocated memory is zeroed with memzero.
void Newz(int id, void* ptr, int nitems, type)Null AV pointer.
Null character pointer.
Null CV pointer.
Null HV pointer.
Null SV pointer.
The original stack mark for the XSUB. See dORIGMARK.
Allocates a new Perl interpreter. See perlembed.
PerlInterpreter* perl_alloc()Initializes a new Perl interpreter. See perlembed.
void perl_construct(PerlInterpreter* interp)Shuts down a Perl interpreter. See perlembed.
void perl_destruct(PerlInterpreter* interp)Releases a Perl interpreter. See perlembed.
void perl_free(PerlInterpreter* interp)Tells a Perl interpreter to parse a Perl script. See perlembed.
int perl_parse(PerlInterpreter* interp, XSINIT_t xsinit, int argc, char** argv, char** env)Tells a Perl interpreter to run. See perlembed.
int perl_run(PerlInterpreter* interp)PL_modglobal is a general purpose, interpreter global HV for use by extensions that need to keep information on a per-interpreter basis. In a pinch, it can also be used as a symbol table for extensions to share data among each other. It is a good idea to use keys prefixed by the package name of the extension that owns the data.
HV* PL_modglobalA convenience variable which is typically used with SvPV when one doesn't care about the length of the string. It is usually more efficient to either declare a local variable and use that instead or to use the SvPV_nolen macro.
STRLEN PL_naThis is the false SV. See PL_sv_yes. Always refer to this as &PL_sv_no.
SV PL_sv_noThis is the undef SV. Always refer to this as &PL_sv_undef.
SV PL_sv_undefThis is the true SV. See PL_sv_no. Always refer to this as &PL_sv_yes.
SV PL_sv_yesPops an integer off the stack.
IV POPiPops a long off the stack.
long POPlPops a double off the stack.
NV POPnPops a string off the stack. Deprecated. New code should provide a STRLEN n_a and use POPpx.
char* POPpPops a string off the stack which must consist of bytes i.e. characters < 256. Requires a variable STRLEN n_a in scope.
char* POPpbytexPops a string off the stack. Requires a variable STRLEN n_a in scope.
char* POPpxPops an SV off the stack.
SV* POPsPush an integer onto the stack. The stack must have room for this element. Handles 'set' magic. See XPUSHi.
void PUSHi(IV iv)Opening bracket for arguments on a callback. See PUTBACK and perlcall.
PUSHMARK;Push a double onto the stack. The stack must have room for this element. Handles 'set' magic. See XPUSHn.
void PUSHn(NV nv)Push a string onto the stack. The stack must have room for this element. The len indicates the length of the string. Handles 'set' magic. See XPUSHp.
void PUSHp(char* str, STRLEN len)Push an SV onto the stack. The stack must have room for this element. Does not handle 'set' magic. See XPUSHs.
void PUSHs(SV* sv)Push an unsigned integer onto the stack. The stack must have room for this element. See XPUSHu.
void PUSHu(UV uv)Closing bracket for XSUB arguments. This is usually handled by xsubpp. See PUSHMARK and perlcall for other uses.
PUTBACK;The XSUB-writer's interface to the C realloc function.
void Renew(void* ptr, int nitems, type)The XSUB-writer's interface to the C realloc function, with cast.
void Renewc(void* ptr, int nitems, type, cast)Tells Perl to require the file named by the string argument. It is analogous to the Perl code eval "require '$file'". It's even implemented that way; consider using Perl_load_module instead.
NOTE: the perl_ form of this function is deprecated.
void require_pv(const char* pv)Variable which is setup by xsubpp to hold the return value for an XSUB. This is always the proper type for the XSUB. See "The RETVAL Variable" in perlxs.
(whatever) RETVALThe XSUB-writer's interface to the C free function.
void Safefree(void* ptr)Copy a string to a safe spot. This does not use an SV.
char* savepv(const char* sv)Copy a string to a safe spot. The len indicates number of bytes to copy. This does not use an SV.
char* savepvn(const char* sv, I32 len)Opening bracket for temporaries on a callback. See FREETMPS and perlcall.
SAVETMPS;Stack pointer. This is usually handled by xsubpp. See dSP and SPAGAIN.
Refetch the stack pointer. Used after a callback. See perlcall.
SPAGAIN;Used to access elements on the XSUB's stack.
SV* ST(int ix)Test two strings to see if they are equal. Returns true or false.
bool strEQ(char* s1, char* s2)Test two strings to see if the first, s1, is greater than or equal to the second, s2. Returns true or false.
bool strGE(char* s1, char* s2)Test two strings to see if the first, s1, is greater than the second, s2. Returns true or false.
bool strGT(char* s1, char* s2)Test two strings to see if the first, s1, is less than or equal to the second, s2. Returns true or false.
bool strLE(char* s1, char* s2)Test two strings to see if the first, s1, is less than the second, s2. Returns true or false.
bool strLT(char* s1, char* s2)Test two strings to see if they are different. Returns true or false.
bool strNE(char* s1, char* s2)Test two strings to see if they are equal. The len parameter indicates the number of bytes to compare. Returns true or false. (A wrapper for strncmp).
bool strnEQ(char* s1, char* s2, STRLEN len)Test two strings to see if they are different. The len parameter indicates the number of bytes to compare. Returns true or false. (A wrapper for strncmp).
bool strnNE(char* s1, char* s2, STRLEN len)This is an architecture-independent macro to copy one structure to another.
void StructCopy(type src, type dest, type)Returns the length of the string which is in the SV. See SvLEN.
STRLEN SvCUR(SV* sv)Set the length of the string which is in the SV. See SvCUR.
void SvCUR_set(SV* sv, STRLEN len)Returns a pointer to the last character in the string which is in the SV. See SvCUR. Access the character as *(SvEND(sv)).
char* SvEND(SV* sv)Invokes mg_get on an SV if it has 'get' magic. This macro evaluates its argument more than once.
void SvGETMAGIC(SV* sv)Expands the character buffer in the SV so that it has room for the indicated number of bytes (remember to reserve space for an extra trailing NUL character). Calls sv_grow to perform the expansion if necessary. Returns a pointer to the character buffer.
void SvGROW(SV* sv, STRLEN len)Returns a boolean indicating whether the SV contains an integer.
bool SvIOK(SV* sv)Returns a boolean indicating whether the SV contains an integer. Checks the private setting. Use SvIOK.
bool SvIOKp(SV* sv)Returns a boolean indicating whether the SV contains an signed integer.
void SvIOK_notUV(SV* sv)Unsets the IV status of an SV.
void SvIOK_off(SV* sv)Tells an SV that it is an integer.
void SvIOK_on(SV* sv)Tells an SV that it is an integer and disables all other OK bits.
void SvIOK_only(SV* sv)Tells and SV that it is an unsigned integer and disables all other OK bits.
void SvIOK_only_UV(SV* sv)Returns a boolean indicating whether the SV contains an unsigned integer.
void SvIOK_UV(SV* sv)Coerces the given SV to an integer and returns it.
IV SvIV(SV* sv)Returns the integer which is stored in the SV, assuming SvIOK is true.
IV SvIVX(SV* sv)Returns the size of the string buffer in the SV, not including any part attributable to SvOOK. See SvCUR.
STRLEN SvLEN(SV* sv)Returns a boolean indicating whether the SV contains a number, integer or double.
bool SvNIOK(SV* sv)Returns a boolean indicating whether the SV contains a number, integer or double. Checks the private setting. Use SvNIOK.
bool SvNIOKp(SV* sv)Unsets the NV/IV status of an SV.
void SvNIOK_off(SV* sv)Returns a boolean indicating whether the SV contains a double.
bool SvNOK(SV* sv)Returns a boolean indicating whether the SV contains a double. Checks the private setting. Use SvNOK.
bool SvNOKp(SV* sv)Unsets the NV status of an SV.
void SvNOK_off(SV* sv)Tells an SV that it is a double.
void SvNOK_on(SV* sv)Tells an SV that it is a double and disables all other OK bits.
void SvNOK_only(SV* sv)Coerce the given SV to a double and return it.
NV SvNV(SV* sv)Returns the double which is stored in the SV, assuming SvNOK is true.
NV SvNVX(SV* sv)Returns a boolean indicating whether the value is an SV.
bool SvOK(SV* sv)Returns a boolean indicating whether the SvIVX is a valid offset value for the SvPVX. This hack is used internally to speed up removal of characters from the beginning of a SvPV. When SvOOK is true, then the start of the allocated string buffer is really (SvPVX - SvIVX).
bool SvOOK(SV* sv)Returns a boolean indicating whether the SV contains a character string.
bool SvPOK(SV* sv)Returns a boolean indicating whether the SV contains a character string. Checks the private setting. Use SvPOK.
bool SvPOKp(SV* sv)Unsets the PV status of an SV.
void SvPOK_off(SV* sv)Tells an SV that it is a string.
void SvPOK_on(SV* sv)Tells an SV that it is a string and disables all other OK bits. Will also turn off the UTF8 status.
void SvPOK_only(SV* sv)Tells an SV that it is a string and disables all other OK bits, and leaves the UTF8 status as it was.
void SvPOK_only_UTF8(SV* sv)Returns a pointer to the string in the SV, or a stringified form of the SV if the SV does not contain a string. Handles 'get' magic.
char* SvPV(SV* sv, STRLEN len)Returns a pointer to the string in the SV. The SV must contain a string.
char* SvPVX(SV* sv)Like <SvPV> but will force the SV into becoming a string (SvPOK). You want force if you are going to update the SvPVX directly.
char* SvPV_force(SV* sv, STRLEN len)Returns a pointer to the string in the SV, or a stringified form of the SV if the SV does not contain a string. Handles 'get' magic.
char* SvPV_nolen(SV* sv)Returns the value of the object's reference count.
U32 SvREFCNT(SV* sv)Decrements the reference count of the given SV.
void SvREFCNT_dec(SV* sv)Increments the reference count of the given SV.
SV* SvREFCNT_inc(SV* sv)Tests if the SV is an RV.
bool SvROK(SV* sv)Unsets the RV status of an SV.
void SvROK_off(SV* sv)Tells an SV that it is an RV.
void SvROK_on(SV* sv)Dereferences an RV to return the SV.
SV* SvRV(SV* sv)Invokes mg_set on an SV if it has 'set' magic. This macro evaluates its argument more than once.
void SvSETMAGIC(SV* sv)Calls sv_setsv if dsv is not the same as ssv. May evaluate arguments more than once.
void SvSetSV(SV* dsb, SV* ssv)Calls a non-destructive version of sv_setsv if dsv is not the same as ssv. May evaluate arguments more than once.
void SvSetSV_nosteal(SV* dsv, SV* ssv)Returns the stash of the SV.
HV* SvSTASH(SV* sv)Taints an SV if tainting is enabled
void SvTAINT(SV* sv)Checks to see if an SV is tainted. Returns TRUE if it is, FALSE if not.
bool SvTAINTED(SV* sv)Untaints an SV. Be very careful with this routine, as it short-circuits some of Perl's fundamental security features. XS module authors should not use this function unless they fully understand all the implications of unconditionally untainting the value. Untainting should be done in the standard perl fashion, via a carefully crafted regexp, rather than directly untainting variables.
void SvTAINTED_off(SV* sv)Marks an SV as tainted.
void SvTAINTED_on(SV* sv)Returns a boolean indicating whether Perl would evaluate the SV as true or false, defined or undefined. Does not handle 'get' magic.
bool SvTRUE(SV* sv)Returns the type of the SV. See svtype.
svtype SvTYPE(SV* sv)An enum of flags for Perl types. These are found in the file sv.h in the svtype enum. Test these flags with the SvTYPE macro.
Integer type flag for scalars. See svtype.
Double type flag for scalars. See svtype.
Pointer type flag for scalars. See svtype.
Type flag for arrays. See svtype.
Type flag for code refs. See svtype.
Type flag for hashes. See svtype.
Type flag for blessed scalars. See svtype.
Returns a boolean indicating whether the SV contains an unsigned integer.
void SvUOK(SV* sv)Used to upgrade an SV to a more complex form. Uses sv_upgrade to perform the upgrade if necessary. See svtype.
void SvUPGRADE(SV* sv, svtype type)Returns a boolean indicating whether the SV contains UTF-8 encoded data.
void SvUTF8(SV* sv)Unsets the UTF8 status of an SV.
void SvUTF8_off(SV *sv)Turn on the UTF8 status of an SV (the data is not changed, just the flag). Do not use frivolously.
void SvUTF8_on(SV *sv)Coerces the given SV to an unsigned integer and returns it.
UV SvUV(SV* sv)Returns the unsigned integer which is stored in the SV, assuming SvIOK is true.
UV SvUVX(SV* sv)Marks an SV as mortal. The SV will be destroyed when the current context ends.
SV* sv_2mortal(SV* sv)Blesses an SV into a specified package. The SV must be an RV. The package must be designated by its stash (see gv_stashpv()). The reference count of the SV is unaffected.
SV* sv_bless(SV* sv, HV* stash)Concatenates the string onto the end of the string which is in the SV. If the SV has the UTF8 status set, then the bytes appended should be valid UTF8. Handles 'get' magic, but not 'set' magic. See sv_catpv_mg.
void sv_catpv(SV* sv, const char* ptr)Processes its arguments like sprintf and appends the formatted output to an SV. If the appended data contains "wide" characters (including, but not limited to, SVs with a UTF-8 PV formatted with %s, and characters >255 formatted with %c), the original SV might get upgraded to UTF-8. Handles 'get' magic, but not 'set' magic. SvSETMAGIC() must typically be called after calling this function to handle 'set' magic.
void sv_catpvf(SV* sv, const char* pat, ...)Like sv_catpvf, but also handles 'set' magic.
void sv_catpvf_mg(SV *sv, const char* pat, ...)Concatenates the string onto the end of the string which is in the SV. The len indicates number of bytes to copy. If the SV has the UTF8 status set, then the bytes appended should be valid UTF8. Handles 'get' magic, but not 'set' magic. See sv_catpvn_mg.
void sv_catpvn(SV* sv, const char* ptr, STRLEN len)Like sv_catpvn, but also handles 'set' magic.
void sv_catpvn_mg(SV *sv, const char *ptr, STRLEN len)Like sv_catpv, but also handles 'set' magic.
void sv_catpv_mg(SV *sv, const char *ptr)Concatenates the string from SV ssv onto the end of the string in SV dsv. Modifies dsv but not ssv. Handles 'get' magic, but not 'set' magic. See sv_catsv_mg.
void sv_catsv(SV* dsv, SV* ssv)Like sv_catsv, but also handles 'set' magic.
void sv_catsv_mg(SV *dstr, SV *sstr)Efficient removal of characters from the beginning of the string buffer. SvPOK(sv) must be true and the ptr must be a pointer to somewhere inside the string buffer. The ptr becomes the first character of the adjusted string.
void sv_chop(SV* sv, char* ptr)Clear an SV, making it empty. Does not free the memory used by the SV itself.
void sv_clear(SV* sv)Compares the strings in two SVs. Returns -1, 0, or 1 indicating whether the string in sv1 is less than, equal to, or greater than the string in sv2.
I32 sv_cmp(SV* sv1, SV* sv2)Compares the strings in two SVs in a locale-aware manner. See "sv_cmp_locale"
I32 sv_cmp_locale(SV* sv1, SV* sv2)Auto-decrement of the value in the SV.
void sv_dec(SV* sv)Returns a boolean indicating whether the SV is derived from the specified class. This is the function that implements UNIVERSAL::isa. It works for class names as well as for objects.
bool sv_derived_from(SV* sv, const char* name)Returns a boolean indicating whether the strings in the two SVs are identical.
I32 sv_eq(SV* sv1, SV* sv2)Free the memory used by an SV.
void sv_free(SV* sv)Get a line from the filehandle and store it into the SV, optionally appending to the currently-stored string.
char* sv_gets(SV* sv, PerlIO* fp, I32 append)Expands the character buffer in the SV. This will use sv_unref and will upgrade the SV to SVt_PV. Returns a pointer to the character buffer. Use SvGROW.
char* sv_grow(SV* sv, STRLEN newlen)Auto-increment of the value in the SV.
void sv_inc(SV* sv)Inserts a string at the specified offset/length within the SV. Similar to the Perl substr() function.
void sv_insert(SV* bigsv, STRLEN offset, STRLEN len, char* little, STRLEN littlelen)Returns a boolean indicating whether the SV is blessed into the specified class. This does not check for subtypes; use sv_derived_from to verify an inheritance relationship.
int sv_isa(SV* sv, const char* name)Returns a boolean indicating whether the SV is an RV pointing to a blessed object. If the SV is not an RV, or if the object is not blessed, then this will return false.
int sv_isobject(SV* sv)Returns the length of the string in the SV. See also SvCUR.
STRLEN sv_len(SV* sv)Returns the number of characters in the string in an SV, counting wide UTF8 bytes as a single character.
STRLEN sv_len_utf8(SV* sv)Adds magic to an SV.
void sv_magic(SV* sv, SV* obj, int how, const char* name, I32 namlen)Creates a new SV which is a copy of the original SV. The new SV is marked as mortal.
SV* sv_mortalcopy(SV* oldsv)Creates a new SV which is mortal. The reference count of the SV is set to 1.
SV* sv_newmortal()Get a sensible string out of the SV somehow.
char* sv_pvn_force(SV* sv, STRLEN* lp)Get a sensible UTF8-encoded string out of the SV somehow. See "sv_pvn_force".
char* sv_pvutf8n_force(SV* sv, STRLEN* lp)Returns a string describing what the SV is a reference to.
char* sv_reftype(SV* sv, int ob)Make the first argument a copy of the second, then delete the original.
void sv_replace(SV* sv, SV* nsv)Weaken a reference.
SV* sv_rvweaken(SV *sv)Copies an integer into the given SV. Does not handle 'set' magic. See sv_setiv_mg.
void sv_setiv(SV* sv, IV num)Like sv_setiv, but also handles 'set' magic.
void sv_setiv_mg(SV *sv, IV i)Copies a double into the given SV. Does not handle 'set' magic. See sv_setnv_mg.
void sv_setnv(SV* sv, NV num)Like sv_setnv, but also handles 'set' magic.
void sv_setnv_mg(SV *sv, NV num)Copies a string into an SV. The string must be null-terminated. Does not handle 'set' magic. See sv_setpv_mg.
void sv_setpv(SV* sv, const char* ptr)Processes its arguments like sprintf and sets an SV to the formatted output. Does not handle 'set' magic. See sv_setpvf_mg.
void sv_setpvf(SV* sv, const char* pat, ...)Like sv_setpvf, but also handles 'set' magic.
void sv_setpvf_mg(SV *sv, const char* pat, ...)Copies an integer into the given SV, also updating its string value. Does not handle 'set' magic. See sv_setpviv_mg.
void sv_setpviv(SV* sv, IV num)Like sv_setpviv, but also handles 'set' magic.
void sv_setpviv_mg(SV *sv, IV iv)Copies a string into an SV. The len parameter indicates the number of bytes to be copied. Does not handle 'set' magic. See sv_setpvn_mg.
void sv_setpvn(SV* sv, const char* ptr, STRLEN len)Like sv_setpvn, but also handles 'set' magic.
void sv_setpvn_mg(SV *sv, const char *ptr, STRLEN len)Like sv_setpv, but also handles 'set' magic.
void sv_setpv_mg(SV *sv, const char *ptr)Copies an integer into a new SV, optionally blessing the SV. The rv argument will be upgraded to an RV. That RV will be modified to point to the new SV. The classname argument indicates the package for the blessing. Set classname to Nullch to avoid the blessing. The new SV will be returned and will have a reference count of 1.
SV* sv_setref_iv(SV* rv, const char* classname, IV iv)Copies a double into a new SV, optionally blessing the SV. The rv argument will be upgraded to an RV. That RV will be modified to point to the new SV. The classname argument indicates the package for the blessing. Set classname to Nullch to avoid the blessing. The new SV will be returned and will have a reference count of 1.
SV* sv_setref_nv(SV* rv, const char* classname, NV nv)Copies a pointer into a new SV, optionally blessing the SV. The rv argument will be upgraded to an RV. That RV will be modified to point to the new SV. If the pv argument is NULL then PL_sv_undef will be placed into the SV. The classname argument indicates the package for the blessing. Set classname to Nullch to avoid the blessing. The new SV will be returned and will have a reference count of 1.
Do not use with other Perl types such as HV, AV, SV, CV, because those objects will become corrupted by the pointer copy process.
Note that sv_setref_pvn copies the string while this copies the pointer.
SV* sv_setref_pv(SV* rv, const char* classname, void* pv)Copies a string into a new SV, optionally blessing the SV. The length of the string must be specified with n. The rv argument will be upgraded to an RV. That RV will be modified to point to the new SV. The classname argument indicates the package for the blessing. Set classname to Nullch to avoid the blessing. The new SV will be returned and will have a reference count of 1.
Note that sv_setref_pv copies the pointer while this copies the string.
SV* sv_setref_pvn(SV* rv, const char* classname, char* pv, STRLEN n)Copies an unsigned integer into a new SV, optionally blessing the SV. The rv argument will be upgraded to an RV. That RV will be modified to point to the new SV. The classname argument indicates the package for the blessing. Set classname to Nullch to avoid the blessing. The new SV will be returned and will have a reference count of 1.
SV* sv_setref_uv(SV* rv, const char* classname, UV uv)Copies the contents of the source SV ssv into the destination SV dsv. The source SV may be destroyed if it is mortal. Does not handle 'set' magic. See the macro forms SvSetSV, SvSetSV_nosteal and sv_setsv_mg.
void sv_setsv(SV* dsv, SV* ssv)Like sv_setsv, but also handles 'set' magic.
void sv_setsv_mg(SV *dstr, SV *sstr)Copies an unsigned integer into the given SV. Does not handle 'set' magic. See sv_setuv_mg.
void sv_setuv(SV* sv, UV num)Like sv_setuv, but also handles 'set' magic.
void sv_setuv_mg(SV *sv, UV u)Returns true if the SV has a true value by Perl's rules.
I32 sv_true(SV *sv)Removes magic from an SV.
int sv_unmagic(SV* sv, int type)Unsets the RV status of the SV, and decrements the reference count of whatever was being referenced by the RV. This can almost be thought of as a reversal of newSVrv. This is sv_unref_flags with the flag being zero. See SvROK_off.
void sv_unref(SV* sv)Unsets the RV status of the SV, and decrements the reference count of whatever was being referenced by the RV. This can almost be thought of as a reversal of newSVrv. The cflags argument can contain SV_IMMEDIATE_UNREF to force the reference count to be decremented (otherwise the decrementing is conditional on the reference count being different from one or the reference being a readonly SV). See SvROK_off.
void sv_unref_flags(SV* sv, U32 flags)Upgrade an SV to a more complex form. Use SvUPGRADE. See svtype.
bool sv_upgrade(SV* sv, U32 mt)Tells an SV to use ptr to find its string value. Normally the string is stored inside the SV but sv_usepvn allows the SV to use an outside string. The ptr should point to memory that was allocated by malloc. The string length, len, must be supplied. This function will realloc the memory pointed to by ptr, so that pointer should not be freed or used by the programmer after giving it to sv_usepvn. Does not handle 'set' magic. See sv_usepvn_mg.
void sv_usepvn(SV* sv, char* ptr, STRLEN len)Like sv_usepvn, but also handles 'set' magic.
void sv_usepvn_mg(SV *sv, char *ptr, STRLEN len)Convert the octets in the PV from UTF-8 to chars. Scan for validity and then turn of SvUTF8 if needed so that we see characters. Used as a building block for decode_utf8 in Encode.xs
NOTE: this function is experimental and may change or be removed without notice.
bool sv_utf8_decode(SV *sv)Attempt to convert the PV of an SV from UTF8-encoded to byte encoding. This may not be possible if the PV contains non-byte encoding characters; if this is the case, either returns false or, if fail_ok is not true, croaks.
NOTE: this function is experimental and may change or be removed without notice.
bool sv_utf8_downgrade(SV *sv, bool fail_ok)Convert the PV of an SV to UTF8-encoded, but then turn off the SvUTF8 flag so that it looks like octets again. Used as a building block for encode_utf8 in Encode.xs
void sv_utf8_encode(SV *sv)Convert the PV of an SV to its UTF8-encoded form. Forces the SV to string form it it is not already. Always sets the SvUTF8 flag to avoid future validity checks even if all the bytes have hibit clear.
STRLEN sv_utf8_upgrade(SV *sv)Processes its arguments like vsprintf and appends the formatted output to an SV. Uses an array of SVs if the C style variable argument list is missing (NULL). When running with taint checks enabled, indicates via maybe_tainted if results are untrustworthy (often due to the use of locales).
void sv_vcatpvfn(SV* sv, const char* pat, STRLEN patlen, va_list* args, SV** svargs, I32 svmax, bool *maybe_tainted)Works like vcatpvfn but copies the text into the SV instead of appending it.
void sv_vsetpvfn(SV* sv, const char* pat, STRLEN patlen, va_list* args, SV** svargs, I32 svmax, bool *maybe_tainted)Variable which is setup by xsubpp to designate the object in a C++ XSUB. This is always the proper type for the C++ object. See CLASS and "Using XS With C++" in perlxs.
(whatever) THISConverts the specified character to lowercase.
char toLOWER(char ch)Converts the specified character to uppercase.
char toUPPER(char ch)Returns the native character value of the first character in the string s which is assumed to be in UTF8 encoding; retlen will be set to the length, in bytes, of that character.
Allows length and flags to be passed to low level routine.
UV utf8n_to_uvchr(U8 *s, STRLEN curlen, STRLEN* retlen, U32 flags)Bottom level UTF-8 decode routine. Returns the unicode code point value of the first character in the string s which is assumed to be in UTF8 encoding and no longer than curlen; retlen will be set to the length, in bytes, of that character.
If s does not point to a well-formed UTF8 character, the behaviour is dependent on the value of flags: if it contains UTF8_CHECK_ONLY, it is assumed that the caller will raise a warning, and this function will silently just set retlen to -1 and return zero. If the flags does not contain UTF8_CHECK_ONLY, warnings about malformations will be given, retlen will be set to the expected length of the UTF-8 character in bytes, and zero will be returned.
The flags can also contain various flags to allow deviations from the strict UTF-8 encoding (see utf8.h).
Most code should use utf8_to_uvchr() rather than call this directly.
UV utf8n_to_uvuni(U8 *s, STRLEN curlen, STRLEN* retlen, U32 flags)Returns the number of UTF8 characters between the UTF-8 pointers a and b.
WARNING: use only if you *know* that the pointers point inside the same UTF-8 buffer.
IV utf8_distance(U8 *a, U8 *b)Return the UTF-8 pointer s displaced by off characters, either forward or backward.
WARNING: do not use the following unless you *know* off is within the UTF-8 data pointed to by s *and* that on entry s is aligned on the first byte of character or just after the last byte of a character.
U8* utf8_hop(U8 *s, I32 off)Return the length of the UTF-8 char encoded string s in characters. Stops at e (inclusive). If e < s or if the scan would end up past e, croaks.
STRLEN utf8_length(U8* s, U8 *e)Converts a string s of length len from UTF8 into byte encoding. Unlike bytes_to_utf8, this over-writes the original string, and updates len to contain the new length. Returns zero on failure, setting len to -1.
NOTE: this function is experimental and may change or be removed without notice.
U8* utf8_to_bytes(U8 *s, STRLEN *len)Returns the native character value of the first character in the string s which is assumed to be in UTF8 encoding; retlen will be set to the length, in bytes, of that character.
If s does not point to a well-formed UTF8 character, zero is returned and retlen is set, if possible, to -1.
UV utf8_to_uvchr(U8 *s, STRLEN* retlen)Returns the Unicode code point of the first character in the string s which is assumed to be in UTF8 encoding; retlen will be set to the length, in bytes, of that character.
This function should only be used when returned UV is considered an index into the Unicode semantic tables (e.g. swashes).
If s does not point to a well-formed UTF8 character, zero is returned and retlen is set, if possible, to -1.
UV utf8_to_uvuni(U8 *s, STRLEN* retlen)Adds the UTF8 representation of the Native codepoint uv to the end of the string d; d should be have at least UTF8_MAXLEN+1 free bytes available. The return value is the pointer to the byte after the end of the new character. In other words,
d = uvchr_to_utf8(d, uv);is the recommended wide native character-aware way of saying
*(d++) = uv;
U8* uvchr_to_utf8(U8 *d, UV uv)Adds the UTF8 representation of the Unicode codepoint uv to the end of the string d; d should be have at least UTF8_MAXLEN+1 free bytes available. The return value is the pointer to the byte after the end of the new character. In other words,
d = uvuni_to_utf8(d, uv);is the recommended Unicode-aware way of saying
*(d++) = uv;
U8* uvuni_to_utf8(U8 *d, UV uv)This is the XSUB-writer's interface to Perl's warn function. Use this function the same way you use the C printf function. See croak.
void warn(const char* pat, ...)Push an integer onto the stack, extending the stack if necessary. Handles 'set' magic. See PUSHi.
void XPUSHi(IV iv)Push a double onto the stack, extending the stack if necessary. Handles 'set' magic. See PUSHn.
void XPUSHn(NV nv)Push a string onto the stack, extending the stack if necessary. The len indicates the length of the string. Handles 'set' magic. See PUSHp.
void XPUSHp(char* str, STRLEN len)Push an SV onto the stack, extending the stack if necessary. Does not handle 'set' magic. See PUSHs.
void XPUSHs(SV* sv)Push an unsigned integer onto the stack, extending the stack if necessary. See PUSHu.
void XPUSHu(UV uv)Macro to declare an XSUB and its C parameter list. This is handled by xsubpp.
Return from XSUB, indicating number of items on the stack. This is usually handled by xsubpp.
void XSRETURN(int nitems)Return an empty list from an XSUB immediately.
XSRETURN_EMPTY;Return an integer from an XSUB immediately. Uses XST_mIV.
void XSRETURN_IV(IV iv)Return &PL_sv_no from an XSUB immediately. Uses XST_mNO.
XSRETURN_NO;Return an double from an XSUB immediately. Uses XST_mNV.
void XSRETURN_NV(NV nv)Return a copy of a string from an XSUB immediately. Uses XST_mPV.
void XSRETURN_PV(char* str)Return &PL_sv_undef from an XSUB immediately. Uses XST_mUNDEF.
XSRETURN_UNDEF;Return &PL_sv_yes from an XSUB immediately. Uses XST_mYES.
XSRETURN_YES;Place an integer into the specified position pos on the stack. The value is stored in a new mortal SV.
void XST_mIV(int pos, IV iv)Place &PL_sv_no into the specified position pos on the stack.
void XST_mNO(int pos)Place a double into the specified position pos on the stack. The value is stored in a new mortal SV.
void XST_mNV(int pos, NV nv)Place a copy of a string into the specified position pos on the stack. The value is stored in a new mortal SV.
void XST_mPV(int pos, char* str)Place &PL_sv_undef into the specified position pos on the stack.
void XST_mUNDEF(int pos)Place &PL_sv_yes into the specified position pos on the stack.
void XST_mYES(int pos)The version identifier for an XS module. This is usually handled automatically by ExtUtils::MakeMaker. See XS_VERSION_BOOTCHECK.
Macro to verify that a PM module's $VERSION variable matches the XS module's XS_VERSION variable. This is usually handled automatically by xsubpp. See "The VERSIONCHECK: Keyword" in perlxs.
XS_VERSION_BOOTCHECK;The XSUB-writer's interface to the C memzero function. The dest is the destination, nitems is the number of items, and type is the type.
void Zero(void* dest, int nitems, type)Until May 1997, this document was maintained by Jeff Okamoto <okamoto@corp.hp.com>. It is now maintained as part of Perl itself.
With lots of help and suggestions from Dean Roehrich, Malcolm Beattie, Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, Neil Bowers, Matthew Green, Tim Bunce, Spider Boardman, Ulrich Pfeifer, Stephen McCamant, and Gurusamy Sarathy.
API Listing originally by Dean Roehrich <roehrich@cray.com>.
Updated to be autogenerated from comments in the source by Benjamin Stuhl.
perlguts(1), perlxs(1), perlxstut(1), perlintern(1)